10 Fuel-saving Device Hoaxes


Man holding red gas can

You may be tired of constantly filling up your car and looking for ways to cut back, but not all fuel-saving methods are good choices.


10 Fuel-saving Device Hoaxes

More than two centuries have passed since humans first started using engine-driven devices to do work. And from the first steam locomotives to today's gas/electric hybrid cars, our development of motorized transport has had a parallel string of innovation: Engineers continuously work to make our engines run more efficiently.

For as long as consumers have complained about gas prices, there has been an army of inventors offering devices to stretch our mileage further. Innovations such as electronic fuel injection and the use of lighter, stronger internal components made great forward strides in fuel efficiency. It's no wonder that these have become standard features -- often government-mandated -- on most modern cars and trucks. But other inventions have turned out to be hoaxes that do little for fuel efficiency and, in some cases, can actually hurt a vehicle's mileage and cause dangerous engine damage.

There's a veritable sea of fuel-saving devices on the market, and while most of them sound great, many offer little -- if any -- benefit for what they cost. It's sometimes difficult to separate the truly useful devices from the not-so-great ones, so read on to learn more about popular fuel-saving hoaxes and how they work.

10: Hydrogen Generators

Hydrogen has long been a tantalizing alternative to petroleum fuel, and for good reason. It's abundant -- the gaseous element combines with oxygen to make water -- and carries a tremendous amount of energy. For years, scientists have worked on producing a hydrogen-powered internal combustion engine, in the hopes that this power source could become a clean-burning alternative to gasoline.

But hydrogen has some serious drawbacks that have slowed its adoption as an automotive fuel. It's not naturally occurring -- it must be extracted from water or other sources -- and the processes to obtain it require a lot of energy. Likewise, the light gas is difficult to store in large enough quantities to be useful for transportation. And the very energy density of hydrogen that makes it so attractive as a fuel also makes it dangerous if not handled properly [source: Alternative Energy News].

But that hasn't stopped a long string of inventors from offering mileage-boosting devices that claim to create hydrogen and add it to a car's fuel, boosting mileage with this high-energy wonder gas. Many of the so-called hydrogen generators work in the same fashion: An onboard electrolysis device pulls water from a storage tank, and, using electricity generated by the car's alternator, splits the hydrogen and oxygen. These are then injected into the engine, supposedly giving the car a power boost and saving fuel [source: Allen].

The problem with these onboard generators is one of capacity. Remember, it takes a great deal of electricity to split the strong bond between water's hydrogen and oxygen atoms. That energy has to come from somewhere, and in a car, that means a significant additional load is placed on the alternator. The car may be producing hydrogen fuel, but it's burning more energy than it creates.

As a result, hydrogen generators typically produce miniscule amounts of the gas. And while this gas may indeed make it into the car's fuel system (some sloppier generators could contain enough leaks to vent any hydrogen before it reaches the engine), it simply isn't enough to produce the claimed power or mileage boosts [source: Tony's Guide to Fuel Saving Gadgets].

Close-up of a car engine

Turbulence in a car engine's airflow can greatly affect the engine's efficiency.


9: Intake Vortex Devices

The internal combustion engines in cars and trucks are essentially large air pumps: The action of the pistons sucks in a precise mix of fuel and air, which is then ignited and vented out through the exhaust. The energy of the burning mixture forces the engine to suck in more of the mix, repeating the cycle. And this next piece of fuel-saving quackery plays off misunderstandings about that process.

Engineers pay close attention to airflow into an engine. The amount of turbulence in the flow can affect how fuel and air mix as they enter the combustion chamber, and this can impact an engine's efficiency. The creators behind intake vortex gadgets often claim that their devices alter this airflow in a way that improves fuel-to-air mixing, improving fuel burn and consequently getting more mileage out of each gallon [source: Allen].

The main warning flag with vortex generators is that they're actually based on antiquated engine technology. Automobiles built before engine management computers became commonplace did rely on the shape and length of intake bodies to manipulate fuel and air mixing. But modern vehicles have computers that constantly adjust fuel flow to match airflow: Create a turbulent airflow in the intake (as a vortex generator does), and the car simply adjusts the amount of fuel it injects [source: Tony's Guide to Fuel Saving Gadgets]. The result? The car may actually run worse, since it's compensating for altered airflow by altering the fuel flow. The computer's fuel-flow rate is calibrated at the factory to provide the right amount of fuel for each combination of driving speed and engine load. Alter this, and you're more likely to hurt performance than improve it [source: Allen].

8: Fuel Ionizers

This type of fuel-saver gadget can be found for both diesel and gasoline-powered vehicles, and often attaches somewhere along the line between the fuel pump and injector. Its creators often claim that it produces an ionic field, which separates fuel molecules from each other as they pass through it. This, they say, causes the fuel to form a more vaporous cloud in the combustion chamber, making it easier for the fuel to burn quickly and cleanly.

This type of device preys on drivers' misunderstanding of how modern engines work. A modern engine's fuel injectors are finely tuned to produce an ultrafine mist of fuel in the combustion chamber. The technology behind this system is so advanced that only a tiny fraction of the injected fuel is not burned. Even if these devices did make the fuel vapor burn better (debatable, to say the least), the miniscule amount of extra fuel burned would not account for the significant mileage gains that the products' sellers claim [source: Tony's Guide to Fuel Saving Gadgets].

Dirty hands holding spark plug

Can certain products enhance a spark plug's reliability enough to make a car's engine more efficient?


7: Ignition Enhancers

This group of fuel-saving devices may have had a touch of merit in years past. These special spark plugs, spark intensifiers and related devices are supposed to improve the rate and amount of fuel burn each time an engine's cylinder cycles, reducing the amount of unspent fuel that gets flushed out the engine's exhaust.

In the early days of internal combustion engines, this type of thinking made some sense. Mechanical distributors could develop faults that caused spark plugs to misfire, resulting in one or more cylinders simply pumping unburned fuel through the chamber. Products that enhanced spark plug reliability could improve efficiency in these low-performance engines.

But that type of problem has virtually disappeared in modern engines. Thanks to computerized engine controls and newer, more reliable ignition technology, most modern cars only misfire if there's a significant problem with the engine. There's really no need to enhance ignition reliability: The engine already takes care of that.

Likewise, the claim that an ignition enhancer makes fuel burn faster or hotter is baseless. Fuel will burn at a set rate, regardless of how hot one makes the spark that ignites it. Ignition enhancers might have once been useful modifications, but now they're simply hoaxes to separate uneducated drivers from their money [source: Tony's Guide to Fuel Saving Gadgets].

6: Water Injection

This technology actually has historic roots. During World War II, aircraft engineers needed a device to combat detonation -- premature ignition that could damage engine parts -- in piston-powered fighter aircraft. Their solution involved injecting a mixture of water and alcohol into the air intake, cooling the engine and helping maintain proper fuel ignition.

After the war, hot-rodders adopted water injection for their own high-performance engines. The technology showed up on a handful of successful race cars, but it has declined in use as advanced materials, engines and fuel technology reduced the risk of detonation.

Detonation, like misfiring, is not a problem most drivers of modern cars will ever experience. It typically only occurs in cases where a driver runs a highly modified engine (which often experiences much higher than normal internal pressure) on low-octane gasoline. In a normal vehicle driven under normal conditions, the scenario that invites detonation is highly unlikely. Water injection may be a useful tool for specific high-performance situations, but it's not a particularly useful or effective device for improving your daily driver's fuel mileage [source: RallyCars.com].

Magnet attracting metal

While unlikely, a strong magnet could be harmful to some of a car's more sensitive electronics.


5: Fuel-line Magnets

These devices, like fuel ionization systems, allegedly prepare the fuel to burn better when it reaches the combustion chamber. Rather than using electric fields to do the job, however, fuel-line magnets claim to use powerful magnetic fields to break down fuel into its basic components.

As is the case with fuel ionizers, fuel-line magnets serve little purpose other than to separate uninformed drivers from their money. Petroleum fuels are ubiquitous because of their stability -- although they can't pack the same punch as fuel sources like hydrogen, they're much safer and easier to handle. Petroleum fuels, in fact, are too stable to be significantly altered by something as small and simple as a magnet placed on a fuel line. Even if a magnet could produce a significant electrical field, that field would be altered by the metal of the fuel line, tank and components. If anything, an extremely strong magnet might disrupt some of the car's more sensitive electronics, although even this is unlikely, given the careful engineering that has gone into today's reliable electronic components [source: Allen].

4: Engine Ionization

These devices, which often attach to spark plug wires or the car's distributor, supposedly improve fuel burn by creating an "ionic corona" around the engine. Supposedly, this performs the same function as fuel ionizers, just closer to the point of ignition.

As mentioned before, the supposed molecular breakdown caused by ionic forces can't really happen. The molecular separation the ionizer claims to produce is what happens during combustion, and gasoline in its unburned form is a poor conductor. It stands to reason that, if gasoline were volatile enough to break down when exposed to a small electrical field carried by a bolt-on ionizer, the much larger field generated by the spark plugs, alternator and distributor would cause the same breakdown well before the gasoline reached the engine [source: Herning].

This is possibly one of the worst hoaxes thrown at drivers. In tests, ionizing devices revealed themselves to be little more than bundles of cleverly packaged wire, which could cause short circuits or fire hazards if attached to the wrong parts of a car's engine [source: Allen]. This is definitely one hoax to avoid at all costs.

Gas burning

While liquid gas burns too slowly to be useful in the combustion process, vaporized gas burns at a very high rate.


3: Fuel Vapor Injectors

Gasoline's ability to burn changes along with its physical state: In liquid form, it burns too slowly to be useful for combustion. But when vaporized, gasoline burns at the explosive rate needed to power an internal combustion engine. Hucksters have been leveraging this fact for years.

One of the more common gadget hoaxes on the market is the fuel vapor injector. Allegedly, this device converts the fuel into a fine vapor before it reaches the engine, which supposedly lets the fuel burn more efficiently.

The problem with these devices comes not at the point of ignition, but at the tail end of the modern car or truck. An exhaust sensor measures the amount of oxygen in the vehicle's exhaust, which can indicate whether the engine is taking in the correct fuel-to-air mixture. Adding extra vaporized fuel through a vapor injector can cause the engine to run rich, with too much fuel and not enough air. The engine's computer would then adjust its fuel injectors to achieve the proper fuel-to-air ratio. At best, this means the engine would run exactly the same as it did without the vapor injector. At worst, a poorly installed vapor injector could cause part of the cylinder bank to run rich, sapping engine performance as the computer makes additional adjustments to address the imbalance [source: Allen].

2: Fuel and Oil Additives

The auto parts stores are full of them: racks of cans, bottles and cartons containing additives that claim to enhance power, reduce wear and improve engine performance -- and all you have to do is pour them into the oil pan or fuel tank. Thanks to their relatively low cost, these are some of the most often-seen mileage-enhancement devices. But not all of them work as advertised.

Modern car and truck engines are the result of decades -- even centuries -- of refinement. Parts do wear out, and any device that turns a series of small explosions into propulsion is bound to wear down over time. But vehicle engineers test engines for tens of thousands of hours, often under conditions worse than a road-going car would ever encounter, and design their products accordingly. As a result, even fuel and oil additives that work as claimed may only show minimal benefits when used.

Some oil additives, for example, are advertised with a striking commercial: an engine is run with the additive in it, and is then drained of oil and restarted. Miraculously, the oil-less engine runs. What the advertisement doesn't say is that the engine, like many modern engines, is likely sturdy enough that it can run temporarily with no oil in the pan. The running engine is less a tribute to the oil additive than to the engineers who designed its tight tolerances and high-wear materials [source: Tony's Guide to Fuel Saving Gadgets].

Some additives may indeed work. But understanding which ones can make a difference for your car or truck requires a thorough understanding of both the engine and the additive.

Modern car engine

Today's car engines are designed to run on unaltered fuel.


1: Fuel Catalysts

These devices insert pieces of various metals into the fuel. The claim behind them is that the metals produce a catalytic reaction in the fuel, removing impurities and making it a more efficient energy carrier. Some of these devices even claim to remove harmful bacteria from the fuel.

The merits of these devices are hard to measure without the aid of a mass spectrometer or other equipment that can measure the chemical changes that might take place in the fuel. But this could all be a moot point, given another factor: Modern engines are optimized to run on modern fuel in its current state. Changing that state moves the fuel away from the optimal fuel the engine is designed to burn. This may only be a minimal change, but it still strays from the standard engineered into the engine and its control systems. If the catalyzed fuel does indeed have properties that make it burn cleaner or faster, the engine's controls may not be able to adapt in a way that realizes any mileage improvements [source: Tony's Guide to Fuel Saving Gadgets].

For more information on saving fuel and related articles, check out the links on the next page.

Lots More Information

Related ArticlesSources
  • Allen, Mike. "Looking For A Miracle: We Test Automotive 'Fuel Savers.'" Popular Mechanics. Aug. 25, 2005. (June 12, 2011) http://www.popularmechanics.com/cars/alternative-fuel/gas-mileage/1802932
  • Alternative Energy News. "Hydrogen Fuel." (June 21, 2011) http://www.alternative-energy-news.info/technology/hydrogen-fuel/
  • Herning, Garrett R. "Singh Groove Concept: Combustion Analysis using Ionization Current." AutoTronixs, LLC. October 2007. (June 21, 2011) http://www.herningg.com/singh/Ionization%20current%20analysis.pdf
  • RallyCars.com. "How a water injection system works." (June 20, 2011) http://www.rallycars.com/Cars/WaterInjection.html
  • Tony's Guide to Fuel Saving Gadgets. "Fuel 'saving' gadgets." (June 12, 2011) http://www.fuelsaving.info/debunk.htm
  • U.S. Department of Energy. "Gas Mileage Tips." (June 22, 2011) http://www.fueleconomy.gov/feg/drive.shtml
  • U.S. Environmental Protection Agency Office of Mobile Sources. "Tips to Save Gas and Improve Mileage." August 1994. (June 12, 2011) http://www.epa.gov/oms/consumer/17-tips.pdf
  • Valdes-Dapena, Peter. "6 gas-saving myths." CNN Money. Aug. 12, 2008. (June 12, 2011) http://money.cnn.com/2008/05/12/autos/ways_to_not_save_gas/