The Purpose of the Flatbed Trailer
Flatbed trailers are also used to tow bulky commercial loads such as large pipes, lumber and machinery. A low boy trailer is a flatbed trailer that sits very close to the ground. Low boys typically haul large tractors and heavy equipment to and from construction sites and strip mines.
Whatever your reasons for using a flatbed trailer, chances are you will be towing a heavy load. Quite often, that large load will be top-heavy. If you are towing vehicles, you have wheels -- and the possibility of rolling -- to add to the equation. In essence, whenever you tow a flatbed trailer, you'd better take extra precaution with how you load your cargo.
You need to fasten your load securely before you can even think about hitting the open road. If you don't, you'll end up losing your load, as we saw in the opening scenario. These are some of the most popular tie-down accessories:
- Nylon strap - - Reinforced nylon straps used to tie-down loads. Straps come in varying width and length options
- Basket strap - - Web-like nylon strap that fits over wheels and can be hooked and attached to trailer eyelets
- V-Straps - - Nylon straps with steel hooks at each end used to latch onto parts underneath the a vehicle's undercarriage
- Ratchet - - Steel ratcheting mechanism used with nylon straps to fasten and tighten the load
If nylon isn't available, you can use chains if you'd like. The same accessories listed above are also available in chain form.
Now that you have the proper equipment, let's go through the proper procedure of loading that car for the car show. First, position the car evenly on the trailer and over the axel. Pull the car as far forward as you can without touching the trailer's front. Next, set the parking brake and put the car in gear if it has standard transmission. Place a chock block in front of and behind at least one wheel, although the more the better.
Now, it's time for the fun stuff. If you have basket straps, use those first. Place one over each tire (if you have only one, use it on the front). You'll want the ratchet in front of the front tires and behind the rear tires. Once you've secured the tires, move underneath the vehicle. It's best to use a V-strap on the front and rear. If your car has tow hooks, use those. Most cars have tow hooks or tie-down eyelets somewhere near the bumpers. Whatever you do, don't hook V-straps to any suspension parts. We don't want to tear anything up. Run the straps in opposite directions so that you can pull the car each way. Finally, ratchet everything down and check your light, hitch and safety chains. Now, you're ready to go.
Be very careful when you're driving a heavy load, like a car, on a flatbed trailer. Drive at a reasonable speed and avoid quick maneuvers. Give yourself plenty of time and room to brake and drive smoothly through curves and turns. Take it easy. Add more time to your trip if you must.
For more tips on towing trailers and selecting the best towing accessories for your needs, explore the links on the next page.